Printing To A Lan Printer - Nortel NAC User Manual

68

Printing to a LAN printer

Introduction
LAN vendor
software
Standard 1.0
You can redirect print jobs to printers attached to your LAN if
• the LAN printer is a NAC-supported printer
• the PC responsible for redirecting the output is running
MTE
You can run special software on a LAN-attached PC to intercept
printer data before MS-DOS can send it to one of the PC's
physical ports. This software is provided by the LAN vendor.
The printer data is then sent to a printer on the network, usually
through the server. This functionality is supplied by the specific
LAN provider that your system's LAN administrator
configures.
If you need this functionality, you must configure the PC printer
port using the MS-DOS commands described in the
MS-DOS user's guide. It is the LAN administrator's
responsibility to install, configure, and maintain this feature.
Network Administration Center
User Guide Supplement
Handling local printing
Printing to a LAN printer
November 1998