76 Installation and configuration
Figure 13
DC system power source connection to the Fiber Remote Multi-IPE Interface unit
Remote IPE installation
The Remote IPE column is normally assembled in the factory with cards
already installed.
If the Remote IPE column is not assembled in the factory, follow the
instructions in Communication Server 1000M and Meridian 1 Large System
Installation and Commissioning (NN43011-310). It describes how to install
Copyright © 2007, Nortel Networks
.
Nortel Communication Server 1000
Fiber Remote Multi-IPE Interface Fundamentals
NN43021-556 01.01 Standard
Release 5.0 30 May 2007