What's new in NAC 2.5
Additional software codes
New software
reinstallation or
upgrade code
Standard 1.0
In NAC 2.5, the new software installation code appears as
follows:
***> Configuring port devices...(TIME)
***> Finished configuring port devices.(TIME)
The following message appears only if you use reentry point 2,
3, or 4.
port_hold started.
Transport Provider daemon started.
Internet services provided.
portmap started.
Stream Error logging started.
netspec "tcpip" not set up.
Network Commands: rwalld
routed started.
NFS Startup...
ONC daemons:
NFS daemons:
Lock manager:
NFS Startup complete.
Line printer scheduler started.
Module ID = NAC00
Network Administration Center
User Guide Supplement
9
November 1998