Changing A Local Printer Type - Nortel NAC User Manual

Handling local printing

Changing a local printer type

Changing a local printer type
Changing the type
of local printer
Standard 1.0
To change the type of local printer, follow these steps.
Starting Point: NAC 2.5 supervisor workstation
Step Action
1 Display any NAC 2.5 screen.
2 Press Control P.
Result: The Local Printer Control Window appears.
3 In the Printer Type field, press Options.
Result: A list of available printer types appears.
4 Select your printer type from the list.
Result: Your entry appears in the Printer Type field.
5 Press Commands and select "Save changes and exit."
Result: A pop-up window appears to confirm that the printer is
being changed. This message warns that print jobs on all
printers being used by NAC are stopped until the local printer is
changed.
6 Type y to continue.
Result: A pop-up window appears to confirm that the local
printer is being changed. After the printer is added, this
message appears at the bottom of the screen: "Local printer
type has been changed."
Network Administration Center
User Guide Supplement
75
November 1998