Remote supervisor login
Entering the phone number
Entering the phone number
Introduction
Entering the
remote access
number
Standard 1.0
This section describes how to enter the phone number of the
modem that NAC uses to remotely access the Meridian MAX.
To enter the remote access number, follow these steps.
Starting Point: NAC maintenance console
Step Action
1
Complete the procedure described in "Configuring the NAC
port" on page 107.
2
Verify that the NAC 2.5 system is shut down.
Note: For instructions on how to shut down the system, refer to
the Network Administration Center System Administration and
Maintenance Guide (NTP 553-4011-510), "Maintenance and
administration programs: system running" chapter.
3
Display the NAC Maintenance and Administration menu.
4
Select Configure NAC System.
Result: The Configure NAC System screen appears.
5
Select Network Definition.
Result: The NAC Network Definition/Installation screen
appears.
Note: For more information on this screen, refer to the Network
Administration Guide (NAC) System Administration and
Maintenance Guide (NTP 553-4011-510), "Maintenance and
administration programs: system shutdown" chapter,
"Configure NAC System" section.
Network Administration Center
User Guide Supplement
109
November 1998