Nortel NAC User Manual page 30

Preparing the system
Describing the system requirements
System capacity
limits
Standard 1.0
The following table lists the maximum configurations supported
by NAC 2.5.
Maximum number of
NAC systems per customer network
Meridian MAX systems connected to a NAC
Note:
The maximum number of network
links is defaulted to 10. This value increases
if you enable the 10+ MAX nodes feature.
Network ACD-DN/CDN queues
Note:
You must assume 16 queues per
Meridian MAX node to calculate this
configuration.
supervisor workstations connected (total)
• supervisor workstations connected on serial
ports
• supervisor workstations connected on a
LAN
system printers connected to NAC
local printers connected through MTE
Note:
This refers to the local printers that
have a printer type other than MTE Generic.
One MTE Generic printer can be configured
for every supervisor workstation running
single session MTE 9 (or higher) to the
maximum number of workstations allowed.
Network Supervisor IDs per NAC
Network Administration Center
User Guide Supplement
19
Maximum
value
1
10
320
60
38
60
38
20
80
November 1998