Nortel NAC User Manual page 100

Configuring 10+ nodes
Configuring the nodes
Identifying node
numbers
Standard 1.0
Step Action
6 From the NAC 2.5 maintenance console, bring the system
down and restart it.
Note: For more information on how to shut down the system,
refer to the Network Administration Guide (NAC) System
Administration and Maintenance Guide (NTP 553-4011-510),
"Maintenance and administration programs: system running"
chapter, "Shutdown the System" section.
Note: For more information on how to restart the system, refer
to the Network Administration Guide (NAC) System
Administration and Maintenance Guide (NTP 553-4011-510),
"Maintenance and administration programs: system shutdown"
chapter, "Restart and Power Down Utilities" section.
After you identify the nodes assigned to Meridian MAX 9 (or
higher) applications, you must find the node numbers that
correspond to the first 10 nodes. This is done from the error log.
To identify the node numbers, follow these steps.
Starting Point: NAC 2.5 maintenance console
Step Action
1 Display the NAC Maintenance and Administration menu.
2 Select Diagnostics.
Result: The NAC System Diagnostics menu appears.
Network Administration Center
User Guide Supplement
89
November 1998