Nortel NAC User Manual page 57

46
Standard 1.0
Step Action
7 From the pop-up menu, select MTE 9 or above.
Result: The entry appears in the Device field.
8 In the Connect field, press PF2 and select Direct or Modem.
Note: If you select Modem, you must also enter a value in the
Baud field.
9 In the Name/Comment field, enter appropriate information if
desired.
10 Press PF1 to display the Commands menu.
11 Select "Save changes and exit."
Network Administration Center 2.5
User Guide Supplement
Using the Meridian Terminal Emulator
Connecting through a serial port or modem
November 1998