Nortel NAC User Manual page 19

8
Previous
reinstallation and
upgrade code
Standard 1.0
During a software reinstallation or upgrade, the system
configures the port devices. This code is shown in the
Network Administration Center (NAC) Installation Guide
(NTP 553-4011-110), "Software reinstallations and upgrades"
chapter, page 8-20.
During this configuration process, the earlier versions of NAC
displayed the following messages:
***> Configuring port devices...(TIME)
***> Finished configuring port devices.(TIME)
The following message appears only if you use reentry point 2,
3, or 4:
port_hold started.
Stream Error logging started.
netspec "tcpip" not set up.
Line printer scheduler started.
Module ID = NAC00
Network Administration Center
User Guide Supplement
What's new in NAC 2.5
Additional software codes
November 1998