Overview - Nortel NAC User Manual

40

Overview

Introduction
In this chapter
MTE 9 features
MTE 9 features
not supported by
NAC 2.5
Standard 1.0
The Meridian Terminal Emulator (MTE), Release 9, allows you
to use your personal computer to access the NAC 2.5, Meridian
MAX, and Customer Controlled Routing applications.
NAC 2.5 works only with MTE 9.
This chapter provides information on how to connect MTE 9 to
NAC 2.5. For any other information on MTE 9, refer to the
MTE User Guide (P0881398).
MTE 9 provides numerous features, such as
• an interface from your PC to NAC 2.5, Meridian MAX, and
CCR
• a LAN connection
• the ability to print NAC reports to a printer attached to your
PC
• the ability to save reports to a file
• the ability to preview reports on your screen
For other details on these and other MTE features, refer to the
MTE User Guide (P0881398).
You cannot use the following MTE 9 features with NAC 2.5:
• customize programmable buttons
• save to a file for MAXcaster
• monitor the real-time status of the agents
Network Administration Center 2.5
User Guide Supplement
Using the Meridian Terminal Emulator
Overview
November 1998