Nortel NAC User Manual page 45

34
Standard 1.0
Step Action
14 Ensure that the modem at the Meridian MAX site is connected
and powered up.
Result: The NAC 2.5 initiates the signal that connects the
modem.
The NAC 2.5 modem dials the Meridian MAX telephone
number as recorded in Step 8.
The connection between the NAC site and the Meridian MAX
site is confirmed when the carrier detect LED constantly
remains on.
15 Use an NT7D99AA modem cable to connect the modem
directly to the NAC multiport cable.
16 Connect the modem to the telephone system with an RJ-11
cable/connector.
17 Power up the modem.
Result: If your Meridian MAX is powered up and functional, the
LED labeled "TR" illuminates on the modem's front panel. If the
"TR" LED does not illuminate, repeat this procedure. If the light
still does not appear, contact your Nortel Networks
representative.
Network Administration Center
User Guide Supplement
Configuring the modems
Network link
November 1998