Table of Contents
Advertisement
108
Standard 1.0
Step Action
6
Move the cursor to the next available entry in the Device field.
7
Press PF2 to view a pop-up menu that lists the available
devices.
8
From the pop-up menu, select Remote Login.
Result: The entry appears in the Device field.
9
In the Connect field, press PF2 and select Modem.
Note: If you select Modem, you must also enter a value in the
Baud field.
10
In the Name/Comment field, enter the appropriate information,
if desired.
11
Press PF1 to display the Commands menu and select "Save
changes and exit."
12
Follow the steps described in the next procedure ("Entering the
phone number" on page 109) to continue the process.
Network Administration Center
User Guide Supplement
Remote supervisor login
Configuring the NAC port
November 1998
Advertisement
Chapters
Table of Contents
