Basic Ied Functions - ABB RELION 670 Series Technical Manual

1MRK 502 066-UUS B
IEC 61850 ANSI
PRP
Remote communication
1) Only included for 9-2LE products
2.5

Basic IED functions

Table 6: Basic IED functions
IEC 61850 or function Description
name
INTERRSIG
SELFSUPEVLST Self supervision with internal event list
TIMESYNCHGEN Time synchronization module
BININPUT, SYNCHCAN, Time synchronization
SYNCHGPS,
SYNCHCMPPS,
SYNCHLON,
SYNCHPPH,
SYNCHPPS, SNTP,
SYNCHSPA
TIMEZONE Time synchronization
DSTBEGIN, GPS time synchronization module
DSTENABLE, DSTEND
IRIG-B Time synchronization
SETGRPS Number of setting groups
ACTVGRP Parameter setting groups
TESTMODE Test mode functionality
CHNGLCK Change lock function
SMBI Signal matrix for binary inputs
SMBO Signal matrix for binary outputs
SMMI Signal matrix for mA inputs
SMAI1 - SMAI12 Signal matrix for analog inputs
3PHSUM Summation block 3 phase
ATHSTAT Authority status
ATHCHCK Authority check
AUTHMAN Authority management
FTPACCS FTP access with password
Table continues on next page
Technical manual
Function description
Process bus communication IEC 61850-9-2
IEC 62439-3 parallel redundancy protocol
Binary signal transfer receive/transmit
Transmission of analog data from LDCM
Receive binary status from remote LDCM
Generator
REG670
(Customized)
1)
0-1
6/36
1
6/3/3
Section 2
Available functions
GUID-C8F0E5D2-E305-4184-9627-F6B5864216CA v9
65