Table of Contents
Advertisement
Service Manual
7 Replacing
Subassemblies in
Front Bezel
Subassembly
7.1 Front Bezel PC Board
7.1.1 Removing Front Bezel PCB
52
Replaceable subassemblies in the Front Bezel Subassembly are as
follows:
• Front Bezel PCB Subassembly
page
51, also see
Figure 3-12 on page
includes bezel w/ lens, display subassembly mounting frame, metal
logo, and feet)
Note: The Front Bezel Subassembly, which includes all components
shown in
Figure 3-9 on page
a complete subassembly, (except for the language and model labels
which must be ordered as a separate kit).
It is necessary to remove the retainer plate, optical encoder subassembly,
and display screen subassembly, to access and remove the Front Bezel
PCB.
1) With front bezel subassembly laying face down on a smooth clean
surface, remove and save six securing screws (see
51) from retainer plate.
'
2) Move retainer plate slightly left to slide tabs on right hand side of plate
(
Figure 3-10
and
4) Set retainer plate aside for use in reassembly.
Figure 3-12Optical Encoder Subassembly. See Note in
caption.
5) Remove rotary knob (
Note: Rotary knob is press fitted onto metal shaft of optical encoder
subassembly. It must be removed very carefully if it is to be
reinstalled. To remove knob, grip it very firmly with vise-grips or
similar tool, and pull it straight out and off of metal shaft. Avoid turning
knob. Placing a piece of cloth around knob should prevent scratching
by vise-grips, and allow knob to be reused.
Siemens Medical Systems, EM-PCS, Danvers
NOT A CONTROLLED DOCUMENT
SC 7000 and SC 9000XL Patient Monitors
"
(
(
!
,
,
(
, and
52)
(
in
Figure 3-10 on page
Figure 3-13 on page
54)
50, is also available for replacement as
#
51) in top of front bezel frame.
in
Figure 3-10 on page 51
7k9kXLSM.c3.CD_ROM.fm/04-99/kaupp
51)
#
in
Figure 3-10 on
51,
in
Figure 3-11
51) out of tab slots
"
in
Figure 3-10
and in Figure 3-12.
ASK-T898-03-7600
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
