Siemens SC 7000 Service Manual page 152

Service Manual
8 SpO2 Function
8.2 Waveforms/Digital Readouts/Tones
8.3 Pulse Tone Generator
8.4 Limits Alarm
9 Temperature Function
9.2 Digital Readout
Temp B________
9.3 Temperature Calibration
10Non-Invasive Blood Pressure Function
10.2 Calibration
10.3 Hardware Overpressure
10.4 Pump
10.5 Interval Mode
10.6 Safety Timer
11etCO2 Function
12HemoMed Pod
12.1 Invasive Blood Pressure Function
12.1.2 HEMO Channel A (Aux./Hemo3 input)
12.1.2 HEMO Channel A (Aux./Hemo2 input, SC 9000XL only)
12.1.2 HEMO POD Channel B_______
12.1.2 HEMO POD Channel C_______
12.1.2 HEMO POD Channel D_______
12.2 Cardiac Output Function
13HEMO POD 2/4
13.1 Invasive Blood Pressure Function
13.1.2 HEMO Channel A (Aux./Hemo3 input)_______
136
(MultiMed POD)
Temp A
• Sensor Cal.
• Sensor Zero
• Measured Value w/ Manual Atm. Press._______
• Measured Value w/ AUTO Atm. Press._______
• Monitor Zero Function
• Monitor Pressure Reading
• Monitor Zero Function
• Monitor Pressure Reading
• Blood temperature
• Injectate temp
• Monitor Zero Function
Siemens Medical Systems, EM-PCS, Danvers
NOT A CONTROLLED DOCUMENT
SC 7000 and SC 9000XL Patient Monitors
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
_______
______
______
_______
_______
ASK-T898-03-7600
7k9kXLSM.apd.CD_ROM.fm/04-99/kaupp