Table of Contents
Advertisement
Chapter 3: Repair
1 Introduction
2 Service Policy and
Replaceable Parts
2.1 Base Unit
2.2 R50 Recorder
ASK-T898-03-7600
7k9kXLSM.c3.CD_ROM.fm/04-99/kaupp
This chapter describes how to disassemble SC 7000 and SC 9000XL
Patient Monitors, replace parts and subassemblies that Siemens has
identified as field-replaceable (see
reassemble the monitors. The structure of an SC7000 or an SC 9000XL
consists of a base unit with attachable modules and pods.
Warning
After replacing a part or subassembly, always functionally verify
proper operation of the monitor, before returning the monitor to
clinical service.
Qualified service personnel may replace the following specific items in the
field. Except for specified items, component-level repairs should not be
attempted and will void any warranty or exchange allowance for returned
subassemblies. A complete list of replaceable components and part
numbers is given in Appendix A.
Front Bezel/Lens Subassembly
Language Label Set
LCD Backlight Lamps
Optical Encoder Subassembly
Rotary Knob
Front Bezel PC Board
Front Bezel Subassembly
NP Pump Subassembly
NP Filters
Batteries
(main
and external)
Power Harness w/ Speaker
External Battery Compartment Door
Main Processor PCB Subassembly
Funnel
Monitor Handle
Rear Housing Side Panels w/ Label Set
Rear Housing / Connector I/O PCB
F1, F2, and F3 on Connector I/O PCB
Since an R50 Recorder operates in conjunction with the monitors,
replaceable subassemblies for the R50 are included in Appendix A.
Front bezel
Printer subassembly
A100 PC Board
Siemens Medical Systems, EM-PCS Danvers
NOT A CONTROLLED DOCUMENT
"Appendix A: Replacement Parts"
w/
Language Label Set
and
Ejection Spring
), and
37
- Quick Links:
- Table of Contents
Hide quick links:
Advertisement
Table of Contents
