Battery Warning; Esd Safety - Oracle Acme Packet 1100 Hardware Installation Manual

SAFETY
DRAFT

Battery Warning

Caution:
Proprietary and Confidential
Caution:

ESD Safety

Precautions
8
Always disconnect the power from the system when removing the Acme Packet
•
1100 from its rack. (Rack mounting of the Acme Packet 1100 is optional.)
• When disconnecting power:
• Disconnect the circuit breaker at the rack.
• Disconnect the power cords from the power outlet on the chassis.
• Use grounded AC power cords that are plugged into grounded electrical outlets.
Ensure that the installation facilities have proper grounding systems and include
•
a grounded rack structure.
When installing the Acme Packet 1100 in an equipment rack, always make the
•
ground connection first and disconnect it last upon uninstallation.
Use shielded Category 5e or 6, RJ45 cables for all 10/100 Ethernet connections
•
to protect the Acme Packet 1100 from potential damage.
To avoid making a complete circuit (which causes electrical shock), use only one
•
hand when working with powered-on electrical equipment.
Use caution when using electrically conductive tools around the Acme Packet
•
1100.
Remove jewelry before working on the Acme Packet 1100.
•
THERE IS RISK OF AN EXPLOSION IF THE BATTERY IS
REPLACED BY THE INCORRECT TYPE. PROPERLY DISPOSE
OF USED BATTERIES.
Perchlorate Material — Special handling may apply. See
www.dtsc.ca.gov/hazardouswaste/perchlorate.
To protect the Acme Packet 1100 delicate electronic components from damage from
static electricity, always follow the appropriate ESD procedures and wear the proper
protective devices (such as an ESD wrist strap) when handling any and all Acme
Packet 1100 hardware and while performing any Acme Packet 1100 System
hardware procedures.
To protect your equipment from ESD, follow these ESD safety precautions:
Ensure that the Acme Packet 1100 is properly grounded.
•
If you are grounding your Acme Packet 1100 to an electrically conductive,
•
grounded rack, check to see whether or not the rack is painted. Paint can hinder
proper grounding. If your equipment rack is painted, you should ground the
Acme Packet 1100 Hardware Installation Guide