The Device Trace In Starter - Siemens SINAMICS G120D Series Operating Instructions Manual
Distributed converter, control units cu240d-2 with encoder evaluation.
Hide thumbs
Also See for SINAMICS G120D Series:
- List manual (910 pages) ,
- Operating instructions manual (398 pages) ,
- Original instructions manual (382 pages)
Table of Contents
Advertisement
A.3
The device trace in STARTER
Description
The device trace graphically displays inverter signals with respect to time.
Signals
In two settings that are independent of one another, using
signals each.
Recording
You can start a measurement as frequently as you require. As long as you do not exit
START, the results remain under the "Measurements" tab with data and time. When
terminating STARTER or under the "Measurements" tab, you can save the measurement
results in the *.trc format.
Converter with control units CU240D-2
Operating Instructions, 04/2015, FW V4.7.3, A5E34262100B AB
A.3 The device trace in STARTER
you can interconnect eight
Appendix
301
Advertisement
Table of Contents
