Inserting Additional System Components; Adding A Terminal Module - Siemens Sinamics S120 Comissioning Manual

Commissioning
4.3 Creating a project
4.3.8

Inserting additional system components

4.3.8.1

Adding a Terminal Module

Requirement
You have already inserted a Control Unit.
Adding Terminal Modules
With Terminal Modules, you can expand the interfaces of the Control Unit (CU). They are
connected to the Control Unit via DRIVE-CLiQ. Terminal Modules do not have to be
specified any further.
1. Open "Additional system components > Terminal Modules" in the hardware catalog.
The following Terminal Modules can be selected:
– Terminal Module TM15
– Terminal Module TM31
– Terminal Module TM41
2. Select the unspecified Terminal Module in the device overview.
3. Drag the unspecified Terminal Module into the device view.
86
Commissioning Manual, (IH3), 07/2016, 6SL3097-4AA10-0BP0
Commissioning with Startdrive