Toshiba e-STUDIO5540C Service Manual page 89

Check item
Finisher controller board
Replace parts
Paper position sensor (S6-1)
Paper position sensor (S6-2)
Finisher controller board
[EA23] Paper transport jam in Finisher (transport sensor)
Classification
Finisher jam
(Finisher section)
Check item
Finisher
Transport sensor (S2)
Finisher controller board
Replace parts
Transport sensor (S2)
Finisher controller board
[EA24] Paper transport jam in Finisher (entrance sensor - transport sensor)
Classification
Finisher jam
(Finisher section)
Check item
Finisher
Entrance sensor (S1)
Transport sensor (S2)
Entrance motor (M1)
Finisher controller board
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
• Connector check
• Board check
[MJ-1103/1104]
• Check if there is any paper in the finisher or on the
transport path of the equipment and remove it if there is.
• Sensor check
• Connector check
• Harness check
• Connector check
• Board check
[MJ-1103/1104]
• Check if there is any paper in the finisher or on the
transport path of the equipment and remove it if there is.
• Sensor check
• Connector check
• Harness check
• Sensor check
• Connector check
• Harness check
• Motor check
• Connector check
• Harness check
• Connector check(CN6, CN26)
• Board check
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 88
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures