Toshiba e-STUDIO5540C Service Manual page 967

Sub
05/08 Mode Element
element
08 Setting Scanner RADF
Mode
08 Setting Scanner
Mode
08 Setting Scanner RADF
Mode
e-STUDIO5560C/6560C/6570C (Ver08)
Sub-
Item Subitem Code
code
3021
3025
3075
Default Acceptable
Details
value value
Set for switchback- 0 <0-1>
mixed size copy
Correction of carriage 2 0-2
position
Allowing of trailing 0 0-1
edge adjustment of
scanning
31
RAM Contents
SYS This setting is whether the original length is detected or
not by transporting without scanning in reverse when
A4-R/FOLIO paper or LT-R/LG paper is detected in a
mixed size copying.
0: Disabled -
AMS:
A series - Judges as A4-R without transporting in
reverse with no scanning.
LT series - Judges whether it is LT-R or LG by its length
without transporting in reverse with no scanning.
APS:
A series - Judges whether it is A4-R or FOLIO without
transporting in reverse with no scanning.
LT series - Judges whether it is LT-R or LG without
transporting in reverse with no scanning.
1: Enable 1
AMS:
A series - Judges whether it is A4-R or FOLIO by
Transporting without scanning in reverse to detect its
length.
LT series - Judges whether it is LT-R or LG by
transporting without scanning in reverse to detect its
length.
APS:
The same as that of APS in 0: Disabled.
SYS 0: No correction
1: Performs correction before scanning
2: Performs correction after scanning
SYS 0: Not allowed
1: Allowed
Proce Servic
dure e UI
1 Yes
1
1