Toshiba e-STUDIO5540C Service Manual page 262

[6032] Card related error: Expired card
Classification
MFP access error
Check item
Setting
[6033] Card related error: Invalid flag data (no room-entry data)
Classification
MFP access error
Check item
Setting
[6034] Card related error: Invalid flag data (invalid card data)
Classification
MFP access error
Check item
Setting
[6041] Card authentication: Card related error
Classification
MFP access error
Check item
Setting
[6042] Card authentication: Card setting error
Classification
MFP access error
Check item
MFP access error
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
The card cannot be used because it has expired.
Use a card with a valid expiration.
The card cannot be used because no room-entry data are
recorded in it.
Use a correct card that has been used for entering the room.
The card cannot be used because the data required for the
use of the card are not correctly set.
Use a valid card.
Card data cannot be obtained correctly.
Reattempt scanning. If the error still occurs after reattempting
scanning for several times, card data may be corrupted or the
card reader may be out of order.
The self-diagnostic code required for card authentication is
not set in this equipment correctly.
Set the correct self-diagnostic code.
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 261
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
Error item
Measures
ERROR CODE and TROUBLESHOOTING
8