Check item
SYS board
IMG board
LGC board
HDD
Page memory
Replace parts
SYS board
IMG board
LGC board
HDD
Page memory
[E091] Motor on time-out jam
Classification
Other paper jam
Check item
Other
Power
SYS board
IMG board
LGC board
HDD
Replace parts
SYS board
IMG board
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
•
Connector check (SYS board -IMG board) (CN135)
•
Page memory check
•
Board check
•
Connector check (IMG board -SLG board) (IMG board -
LGC board) (CN422, CN423, CN424)
•
Harness check
•
Board check
•
Connector check (CN319, CN320)
•
Harness check
•
Board check
•
Connector check
•
HDD check
Check if the page memory is correctly connected to the
connector on the SYS board.
The equipment does not operate normally because
abnormality occurred on an interface between the SYS board
and engine firmware.
•
Check if there is any paper in the equipment. Remove it if
there is.
•
If the error still occurs, check the following.
Check if the error is cleared by turning the power OFF and
then back ON.
•
Connector check (SYS board -IMG board) (CN135)
•
Board check
•
Connector check (IMG board -SLG board) (IMG board -
LGC board) (CN422, CN423, CN424)
•
Harness check
•
Board check
•
Connector check (CN319, CN320)
•
Harness check
•
Board check
•
Connector check
•
HDD check
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 68
Measures
Remarks
Error item
Measures
Remarks