Toshiba e-STUDIO5540C Service Manual page 832

Sub
05/08 Mode Element
element
05 Adjustmen Printer Feeding Paper aligning
t mode system/Pa amount adjustment
per
transport
05 Adjustmen Printer Feeding Paper aligning
t mode system/Pa amount adjustment
per
transport
05 Adjustmen Printer Image
t mode control
05 Adjustmen Printer Image Displaying parameters
t mode control for color regist.
e-STUDIO5560C/6560C/6570C (Ver08)
Sub-
Item Subitem Code
code
ADU 4615
ADU 4615
4719
4720
Default Acceptable
Details
value value
3 Thick paper2 ;Short 30 0-63
size2
4 Thick paper2 ;Short 30 0-63
size3
Forced color - -
registration control
0 Front & rear sides 0 0-255
113
RAM Contents
M When the value increases by "1", the aligning amount
increases by approx. 0.54 mm.
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size 1: 205 mm to 219 mm
Short size 2: 160 mm to 204 mm
Short size 3: 159 mm or shorter
M When the value increases by "1", the aligning amount
increases by approx. 0.54 mm.
<Paper length>
Long size: 330 mm or longer
Middle size: 220 mm to 329 mm
Short size 1: 205 mm to 219 mm
Short size 2: 160 mm to 204 mm
Short size 3: 159 mm or shorter
M Forcibly performs the color registration control
adjustment in order to eliminate the color deviation of Y,
M, C and K colors.
M Checks the cause of "CA00" error when it occurs.
If the value of each bit is "0", it means normal. If the
value of each bit is "1", it means abnormal.
bit0: Y color rear side
bit1: Y color front side
bit2: M color rear side
bit3: M color front side
bit4: C color rear side
bit5: C color front side
bit6: K color rear side
bit7: K color front side
Proce Servic
dure e UI
4 Yes
4 Yes
6 Yes
10 Yes