Toshiba e-STUDIO5540C Service Manual page 43

Check item
Drive unit, Rollers
LGC board
Replace parts
Lower paper exit sensor
Bridge unit transport exit motor
PFC board
DRV board
LGC board
Exit roller
[E980] Stop jam at the lower paper exit sensor
Classification
Paper transport jam (Relay transport
section)
Check item
Lower paper exit sensor
Exit motor
PFC board
DRV board
Drive unit, Rollers
LGC board
Replace parts
Lower paper exit sensor
exit motor
PFC board
DRV board
LGC board
Exit roller
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
• Gear check
• Roller check
• Connector check (CN309)
• Board check
Paper transported from the bridge unit does not pass the
lower paper exit sensor.
• Sensor check
(Perform the input check: 03-[COPY]ON/[5]/[G],
03-[ALL]OFF/[4]/[C])
• Connector check
• Harness check
• Motor check
(Perform the output check: 03-140)
• Connector check
• Harness check
• Connector check (CN500, CN515,CN516)
• Board check
• Connector check (CN537, CN539, CN540)
• Board check
• Gear check
• Roller check
• Connector check (CN309)
• Board check
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 42
Measures
Remarks
Error item
Measures
Remarks