Toshiba e-STUDIO5540C Service Manual page 195

[F106_3] ADI-HDD error: ADI authentication Admin Password generation error
Classification
Other service call
Check Item
Setting
[F106_4] ADI-HDD error: Authentication random number generation error
Classification
Other service call
Check Item
Setting
[F106_5] ADI-HDD error: Authentication data transmission error
Classification
Other service call
Check Item
Setting
[F106_6]/[F106_7]/[F106_8]/[F106_10] /[F106_UNDEF] ADI-HDD error: Error caused by reason
other than F106_0 to 5 errors
Classification
Other service call
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
ADI-HDD error: The generation of ADI authentication Admin
Password fails.
Reinstall the system ROM data (OS Data).
Reinstall the master data (HD Data).
ADI-HDD error: The generation of a random number for
authentication data fails.
Reinstall the system ROM data (OS Data).
Reinstall the master data (HD Data).
ADI-HDD error: The transmission of authentication data fails.
Reinstall the system ROM data (OS Data).
Reinstall the master data (HD Data).
• In case this error occurred after returning SRAM data for
SRAM cloning:
Copy the ADI-HDD encryption key from FROM to SRAM.
(1) Start the equipment in the 3C mode: [3] + [C] + [POWER]
(2) The authentication menu is displayed. Press [OK]. (Not
required in the default setting)
(3) Select "5. Key Backup Restore" and then press the
[START] button.
(4) Select "6. ADIKey FROM to SRAM" and then press the
[START] button.
(5) After the restoring of the encryption key has completed,
"Operation Complete" is displayed.
(6) After the operation has completed, shut down the
equipment by pressing the [POWER] button.
ADI-HDD error: Error caused by reason other than F106_0 to 5
errors
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 194
Error item
Measure
Error item
Measure
Error item
Measure
Error item