Toshiba e-STUDIO5540C Service Manual page 471

Sub
05/08 Mode Element
element
08 Setting System Network
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Feeding
Mode system /
Paper
transport
08 Setting Printer Paper Automatic change of
Mode feeding paper source
08 Setting Printer Laser
Mode
e-STUDIO5540C/6540C/6550C (Ver08)
Sub-
Item Subitem Code
code
3865
4002
4004
4005
4010
Auto 4011
4012
Default Acceptable
Details
value value
Availability of telnet 2 1-2
server
Judged number of 0 0-2
polygonal motor
rotation error (Normal
rotation)
Polygonal motor 3 0-3
rotation number on
standby
Polygonal motor 0 0-3
rotation in the energy
saving mode
Default setting of 0 0-6
paper source
PPC 1 <1-2>
Pre-running rotation of 0 0-2
polygonal motor
64
RAM Contents
NIC 1: Enable 2: Disable
M Displays the error [CA10] when the set number of
rotation error has been detected.0: 2 times 1: 10 times
2: 20 times
M 0: 26574.8rpm 1: 20000rpm 2: 15000rpm 3: 10000rpm
M 0: Stopped 1: 10000rpm 2: 15000rpm 3: 20000rpm
SYS 0: A4/LT
1: T-LCF
2: 1st drawer
3: 2nd drawer
4: 3rd drawer
5: 4th drawer
6: O-LCF
SYS Sets whether the drawer is changed automatically if the
paper runs out in the selected drawer and the paper of
the same size is in other drawer.
1: ON (Changes to the drawer with the same paper
direction and size: ex. A4 to A4)
2: ON (Changes to the drawer with the same paper size.
Paper with the different direction is acceptable as long
as the size is the same: ex., A4 to A4-R, LT-R to LT. "1"
is applied when the staple/hole punch is specified.)
SYS Sets whether or not switching the polygonal motor from
the standby rotation to the normal rotation when the
original is set on the RADF or the RADF is opened. 0:
Valid (when using RADF and the original is set
manually) 1: Invalid 2: Valid (when using RADF only)
Proce Servic
dure e UI
12
1
1
1
1
1 Yes
1