Toshiba e-STUDIO5540C Service Manual page 101

[ED14] Rear alignment plate home position error
Classification
Finisher jam (Finisher section)
Check item
Rear alignment plate
Rear alignment plate home position
sensor (S7)
Rear alignment motor (M9)
Finisher controller board
Replace parts
Rear alignment plate home position
sensor (S7)
Rear alignment motor (M10)
Finisher controller board
[ED15] Paddle home position error
Classification
Finisher jam (Finisher section)
Check item
Paddle
Paddle home position sensor (S3)
Paddle motor (M8)
Finisher controller board
Replace parts
Paddle home position sensor (S3)
Paddle motor (M8)
Finisher controller board
[ED16] Buffer tray home position error
Classification
Finisher jam (Finisher section)
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
The rear alignment plate is not at the home position. [MJ-
1103/1104]
• Move the rear alignment plate. If there is any mechanical
problem, fix its mechanism.
• Sensor check
• Connector check
• Harness check
• Motor check
• Connector check
• Harness check
• Connector check
• Board check
The paddle is not at the home position. [MJ-1103/1104]
• Rotate the paddle. If there is any mechanical problem, fix
its mechanism.
• Sensor check
• Connector check
• Harness check
• Motor check
• Connector check
• Harness check
• Connector check
• Board check
The buffer tray is not at the home position. [MJ-1103/1104]
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 100
Error item
Measures
Remarks
Error item
Measures
Remarks
Error item