Toshiba e-STUDIO5540C Service Manual page 721

Sub
05/08 Mode Element
element
05 Adjustmen Process Developm Auto adj. for dev.
t mode ent material supply and
ATS
05 Adjustmen Process Developm
t mode ent
05 Adjustmen Process Developer
t mode
05 Adjustmen Process Transfer Main charger grid bias
t mode adjustment
05 Adjustmen Process Transfer Main charger grid bias
t mode adjustment
05 Adjustmen Process Transfer Main charger grid bias
t mode adjustment
05 Adjustmen Process Transfer Main charger grid bias
t mode adjustment
05 Adjustmen Process Developm Developer bias DC(-)
t mode ent calibration voltage
05 Adjustmen Process Developm Developer bias DC(-)
t mode ent calibration voltage
05 Adjustmen Process Developm Developer bias DC(-)
t mode ent calibration voltage
e-STUDIO5560C/6560C/6570C (Ver08)
Sub-
Item Subitem Code
code
2406
2416
2417
2461
2462
2463
2464
Y 2627
Y 2627
M 2628
Default Acceptable
Details
value value
Adjustment for 3 128 0-255
colors(Y,M,C)
Forcible mixing in the - -
developer unit
Manual forcible - -
discharge of
developer material
Y 73 0-255
M 73 0-255
C 73 0-255
K 73 0-255
0 Lower limit 100 0-1000
1 Upper limit 900 0-1000
0 Lower limit 100 0-1000
2
RAM Contents
M Sets the auto-toner sensor output and supply of
developer material automatically. The larger the value,
the larger the sensor output becomes.
M Decelerates the rotation of each developer unit mixer
motor to mix the developer material in the developer
unit forcibly. Perform this code when the process unit is
installed or removed.
M Discharges developer material forcibly.
M Judges the presence of the developer unit-K. If it is
judged as present, the input of this code will be refused.
(Unit: bit)
To perform this code, disconnect all the auto-toner
sensors in the EPU.
M Judges the presence of the developer unit-K. If it is
judged as present, the input of this code will be refused.
(Unit: bit)
To perform this code, disconnect all the auto-toner
sensors in the EPU.
M Judges the presence of the developer unit-K. If it is
judged as present, the input of this code will be refused.
(Unit: bit)
To perform this code, disconnect all the auto-toner
sensors in the EPU.
M Judges the presence of the developer unit-K. If it is
judged as present, the input of this code will be refused.
(Unit: bit)
To perform this code, disconnect all the auto-toner
sensors in the EPU.
M (Unit: V)
M (Unit: V)
M (Unit: V)
Proce Servic
dure e UI
5 Yes
5 Yes
5
3
3
3
3
4 Yes
4 Yes
4 Yes