[E200] 1st drawer transport jam (not reaching the registration sensor)
[E210] 2nd drawer transport jam (not reaching the registration sensor)
[E270] Bypass transport jam (not reaching the registration sensor)
[E300] 3rd drawer transport jam (not reaching the registration sensor)
[E330] 4th drawer transport jam (not reaching the registration sensor)
[E3C0] LCF transport jam (not reaching the registration sensor)
Classification
Paper transport jam
Check item
Registration sensor
Transport motor-1
PFC board
LGC board
Drive unit, Rollers
Replace parts
Registration sensor
Transport motor-1
PFC board
LGC board
Rollers
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
The paper does not reach the registration sensor after it has
passed the 1st drawer feed sensor.(E200)
The paper does not reach the registration sensor after it has
passed the 1st drawer feed sensor.(E210)
Paper fed from the bypass tray and passed through the
bypass feed sensor does not reach the registration
sensor.(E270)
•
Sensor check
(Perform the input check: 03-[ALL]OFF/[4]/[B],03-
[COPY]ON/[5]/[F])
•
Connector check
•
Harness check
•
Motor check
(Perform the output check: 03-124/524)
•
Connector check
•
Harness check
•
Connector check (CN500, CN512, CN520)
•
Board check
•
Connector check (CN309)
•
Board check
•
Gear check
•
Roller check
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 50
Error item
Measures
Remarks