Toshiba e-STUDIO5540C Service Manual page 75

[E440] Paper feed cover open jam
Classification
Cover open jam
Check item
Paper feed cover
Side door switch
LGC board
Replace parts
ADU opening/closing switch
LGC board
[E450] Option LCF open jam
Classification
Cover open jam
Check item
Option LCF
Option LCF installation sensor
LCF board
LGC board
Replace parts
LCF side cover opening/closing
switch
LCF board
LGC board
[E480] Bridge unit open jam
Classification
Cover open jam
Check item
Bridge unit
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
The paper feed cover has opened during printing.
• Close the paper feed cover if it is opened.
• Remove if there is any paper before closing it.
• Switch check
(Perform the input check: 03-[COPY]ON/[8]/[H])
• Connector check
• Harness check
• Connector check (CN348)
• Board check
The optional LCF has been disconnected from the equipment
during printing.
• Connect the LCF in the equipment.
• Switch check
(Perform the input check: 03-[SCAN]ON/[5]/[C])
• Connector check
• Harness check
• Connector check
• Board check
• Connector check (CN349)
• Board check
The bridge unit has opened during printing.
• Close the bridge unit if it is opened.
• Remove if there is any paper before closing it.
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 74
Error item
Measures
Remarks
Error item
Measures
Remarks
Error item
Measures