Toshiba e-STUDIO5540C Service Manual page 83

Check item
Intermediate transport sensor
Reading end sensor
Exit sensor
RADF board
Drive unit, Rollers
Replace parts
Original exit reverse sensor
Registration sensor
Original width detection sensor-1
Original width detection sensor-2
Original width detection sensor-3
Intermediate transport sensor
Reading end sensor
Exit sensor
RADF board
Roller
[E860] Original jam access cover open jam
Classification
RADF jam
Check item
Original jam access cover
Original jam access cover opening/
closing sensor
RADF board
Replace parts
Original exit reverse sensor
RADF board
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
• Sensor check
(Perform the input check: 03: [FAX]/ON/[8]/[G])
• Connector check
• Harness check
• Sensor check
(Perform the input check: 03: [FAX]/ON/[7]/[F])
• Connector check
• Harness check
• Sensor check
(Perform the input check: 03: [FAX]/ON/[7]/[E])
• Connector check
• Harness check
• Connector check (CN74, CN75)
• Board check
• Gear check
• Roller check
Perform the 05-3210
The Original jam access cover has opened during RADF
operation.
• Close the Original jam access cover if it is opened.
• Remove if there is any original before closing it.
• Sensor check
(Perform the input check: 03: [FAX]/ON/[7]/[C])
• Connector check
• Harness check
• Connector check (CN74)
• Board check
Perform the 05-3210
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 82
Measures
Remarks
Error item
Measures
Remarks