Toshiba e-STUDIO5540C Service Manual page 472

Sub
05/08 Mode Element
element
08 Setting Printer Laser
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Laser
Mode
08 Setting Printer Paper Automatic change of
Mode feeding paper source
08 Setting Printer Paper Automatic change of
Mode feeding paper source
08 Setting Printer Paper Feeding retry number
Mode feeding setting
08 Setting Printer Paper Feeding retry number
Mode feeding setting
e-STUDIO5540C/6540C/6550C (Ver08)
Sub-
Item Subitem Code
code
4013
4014
4015
When a drawer is 4016
specified
When a drawer is 4016
specified
1st drawer 4020
1st drawer 4020
Default Acceptable
Details
value value
Polygonal motor 0 0-1
rotational status
switching at the Auto
Clear Mode
Rotational status of 0 0-1
polygonal motor on
standby
Timing of auto- 3 0-21
clearing of polygonal
motor pre-running
rotation
0 PPC 0 <0-1>
1 Printing/BOX printing 0 <0-1>
0 Plain paper 5 <0-5>
1 Others paper 5 <0-5>
65
RAM Contents
SYS Sets whether or not switching the polygonal motor from
the normal rotation to the standby rotation at the Auto
Clear Mode.
0: Valid 1: Invalid
SYS Sets the rotational status of polygonal motor on
standby.
0: Rotated (The rotational speed is set at 08-4005.)
1: Stopped
SYS Switches the polygonal motor to the standby rotation
when a certain period of time has passed from the pre-
running. This code sets the period to switch the status
to the standby rotation.
15+(setting value) x 5 sec.
0: 15 sec. 1: 20 sec. 2: 25 sec. 3: 30 sec. 4: 35 sec.
5: 40 sec. 6: 45 sec. 7: 50 sec. 8: 55 sec. 9: 60 sec.
10: 65 sec. 11: 70 sec. 12: 75 sec. 13: 80 sec. 14: 85
sec. 15: 90 sec. 16: 95 sec. 17: 100 sec. 18: 105 sec.
19: 110 sec. 20: 115 sec. 21: 120 sec.
* This setting is effective when "0" or "2" is set for 08-
4012.
SYS Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when coping.
0: Does not change the paper source automatically
1: Changes the paper source automatically
SYS Sets whether the automatic change of paper source is
performed or not if the drawer is specified as the paper
source and the paper in the specified drawer runs out
when printing/BOX printing.
0: Does not change the paper source automatically
1: Changes the paper source automatically
M Sets the number of times feeding retry occurs from the
1st drawer.
M Sets the number of times feeding retry occurs from the
1st drawer.
Proce Servic
dure e UI
1
1
1
4 Yes
4 Yes
4 Yes
4 Yes