Toshiba e-STUDIO5540C Service Manual page 968

Sub
05/08 Mode Element
element
08 Setting System User Card reader
Mode interface
08 Setting System User Card reader
Mode interface
e-STUDIO5560C/6560C/6570C (Ver08)
Sub-
Item Subitem Code
code
3500
3501
Default Acceptable
Details
value value
Device setting 0 0-
429496729
5
Format information 1 0 0-
429496729
5
32
RAM Contents
SYS To enable the e-Bridge ID Gate, a card reading device
should be set in the order of "ABYYZZZZ". (Enter the
corresponding values to "A", "B", "YY" and "ZZZZ".)
- AB: Special setting
- A: Debugging NIC
0: Not used 1: Used
- B: Interface
0: USB connection 1: Serial connection (KP-2003
only)
- YY: Authentication
00: No authentication using card
03: Mifare (KP-2005 only)
04: HID (KP-2004 only)
06: KB Emulation I/F Reader
07: 3Track Magnetic Swipe Reader
09: 2Track Magnetic Swipe Reader
- ZZZZ: Sub-code (Specifies the usage type of card ID)
0000: No authentication using card
0001: IDm (Felica/NFC-Felica) and (or) UID
(Mifare/NFC-Mifare)
0002: Data (Felica/NFC-Felica/Mifare/NFC-Mifare)
0003: SSFC mode
SYS To access the data in the noncontact IC card, the Key
Information "LLLL" and the Sector Number "MMMM"
should be set. The "LLLL" should be set first, and then
"MMMM".
<KP-2005>
LLLL: Key information
MMMM: Sector number (hexadecimal number)
Proce Servic
dure e UI
5 Yes
5 Yes