Toshiba e-STUDIO5540C Service Manual page 52

[E220] 2nd drawer transport jam (not reaching the 1st drawer transport sensor)
[E310] 3rd drawer transport jam (not reaching the 1st drawer transport sensor)
[E340] 4th drawer transport jam (not reaching the 1st drawer transport sensor)
[E3D0] LCF transport jam (not reaching the 1st drawer transport sensor)
Classification
Paper transport jam
Check item
1st drawer transport sensor
Transport motor-2
Transport motor-1
PFC board
Drive unit, Rollers
Replace parts
1st drawer transport sensor
Transport motor-2
Transport motor-1
PFC board
Rollers
[E230] 1st drawer misfeeding (Paper not reaching the 1st drawer transport sensor)
Classification
Paper transport jam
Check item
1st drawer transport sensor
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
The paper does not reach the 1st drawer transport sensor
after it has passed the 2nd drawer feed sensor.(E220)
The paper does not reach the 1st drawer transport sensor
after it has passed the 2nd drawer feed sensor.(E310)
The paper does not reach the 1st drawer transport sensor
after it has passed the 2nd drawer feed sensor.(E340)
Paper fed from the LCF and passed through the 2nd drawer
feed sensor does not reach the 1st drawer transport
sensor.(E3D0)
• Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[D])
• Connector check
• Harness check
• Motor check
(Perform the output check: 03-125/525)
• Connector check
• Harness check
• Motor check
(Perform the output check: 03-124/524)
• Connector check
• Harness check
• Connector check (CN512, CN513)
• Board check
• Gear check
• Roller check
Paper fed from the 1st drawer does not reach the 1st drawer
transport sensor.
• Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[D])
• Connector check
• Harness check
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 51
Error item
Measures
Remarks
Error item
Measures
ERROR CODE and TROUBLESHOOTING
8