Toshiba e-STUDIO5540C Service Manual page 46

[E140] 2nd drawer misfeeding (paper not reaching the 2nd drawer feed sensor)
Classification
Paper misfeeding
Check item
2nd drawer feed sensor
Feed motor
PFC board
Drive unit, Rollers
Replace parts
2nd drawer feed sensor
Feed motor
PFC roller
Rollers
[E150] 3rd drawer misfeeding (paper not reaching the 3rd drawer feed sensor)
Classification
Paper misfeeding
Check item
3rd drawer feed sensor
Feed/transfer motor
3rd drawer feed clutch
PFC board
Drive unit, Rollers
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
The paper fed from the 2nd drawer does not reach the 2nd
drawer feed sensor.
• Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[G])
• Connector check
• Harness check
• Motor check
(Perform the output check: 03-121)
• Connector check
• Harness check
• Connector check (CN512, CN513)
• Board check
• Gear check
• Roller check
The paper fed from the 3rd drawer does not reach the 3rd
drawer feed sensor.
• Sensor check
(Perform the input check: 03-[SCAN]ON/[1]/[F])
• Connector check
• Harness check
• Motor check
(Perform the output check: 03-122)
• Connector check
• Harness check
• Clutch check
(Perform the output check: 03-250)
• Connector check
• Harness check
• Connector check (CN502, CN505)
• Board check
• Gear check
• Roller check
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
8 - 45
Error item
Measures
Remarks
Error item
Measures
ERROR CODE and TROUBLESHOOTING
8