Replace parts
Bridge unit connecting detection
switch
LGC board
8.3.7
RADF jam
[E712] Jam not reaching the original registration sensor
Classification
RADF jam
Check item
Original registration sensor
Original pickup solenoid
RADF board
Drive unit, Rollers
Replace parts
Original registration sensor
Original pickup solenoid
RADF board
Roller
[E714] Feed signal reception jam
Classification
RADF jam
Check item
Original empty sensor
RADF board
Drive unit, Rollers
e-STUDIO5540C/6540C/6550C/5560C/6560C/6570C
ERROR CODE and TROUBLESHOOTING
The original fed from the original feeding tray does not reach
the original registration sensor.
•
Sensor check
(Perform the input check: 03-[FAX]ON/[7]/[H])
•
Connector check
•
Harness check
•
Motor check
(Perform the output check: 03-)
•
Connector check
•
Harness check
•
Connector check (CN74,CN79)
•
Board check
•
Gear check
•
Roller check
Perform the 05-3210
Pickup roller, feed roller, separation roller
The feed signal is received even no original exists on the
original feeding tray.
•
Sensor check
(Perform the input check: 03-[FAX]ON/[7]/[B])
•
Connector check
•
Harness check
•
Connector check (CN74)
•
Board check
•
Gear check
•
Roller check
© 2011 - 2014 TOSHIBA TEC CORPORATION All rights reserved
8 - 76
Remarks
Error item
Measures
Remarks
Error item
Measures