Toshiba e-STUDIO5540C Service Manual page 935

Sub
05/08 Mode Element
element
05 Adjustmen Image ADF noise SCN(color)
t mode Processing reduction
05 Adjustmen Image ADF noise SCN(color)
t mode Processing reduction
05 Adjustmen Image ADF noise SCN(color)
t mode Processing reduction
05 Adjustmen System Maintenan
t mode ce
05 Adjustmen System Feeding Media sensor position
t mode system/Pa adjustment
per
transport
05 Adjustmen System Image
t mode
05 Adjustmen System Image
t mode
05 Adjustmen System Image
t mode
e-STUDIO5560C/6560C/6570C (Ver08)
Sub-
Item Subitem Code
code
8414
8415
8416
9043
9092
9104
9107
9149
Default Acceptable
Details
value value
Text 100 0-200
Printed image 100 0-200
Photo (developing 100 0-200
paper)
Equipment number - -
(serial number)
display
Media sensor position - -
adjustment
Compression quality 5 0-10
of SLIM PDF
background
processing
Resolution of SLIM 1 0-3
PDF background
processing
Acquisition of image - -
position adjustment
log
216
RAM Contents
SYS When the value decreases, the effect of reducing
streaks (set with 08-8300) becomes larger. When the
value increases, the effect of reducing streaks (set with
08-8300) becomes smaller.
When the value is too small, text might be blurry. When
"0" is set, this function is disabled.
SYS When the value decreases, the effect of reducing
streaks (set with 08-8300) becomes larger. When the
value increases, the effect of reducing streaks (set with
08-8300) becomes smaller.
When the value is too small, text might be blurry. When
"0" is set, this function is disabled.
SYS When the value decreases, the effect of reducing
streaks (set with 08-8300) becomes larger. When the
value increases, the effect of reducing streaks (set with
08-8300) becomes smaller.
When the value is too small, text might be blurry. When
"0" is set, this function is disabled.
SYS If this code is performed, 08-9601 is performed. 7 digits
out of 9 digits can be entered except for upper 2 digits
(fixed digits).
- Checks the reference voltage of the media sensor while
no paper is inserted between the tray and copy paper
and adjusts the position of the sensor accordingly.
SYS 0-10
0: High compression, low image quality
10: Low compression, high image quality
SYS 0: 75dpi
1: 100dpi
2: 150dpi
3: 200dpi
- Saves the image position adjustment log to the USB
device. Insert the USB device to the equipment before
performing this code.
Proce Servic
dure e UI
1
1
1
1
6 Yes
1
1
6