Multi-Project Setting Parameter (Device Setting) - Mitsubishi Electric M800VW Series Programming Manual

M800V/M80V Series PLC Programming Manual (1/2)
11 Parameters
11.3 Other Parameters

11.3.3 Multi-Project Setting Parameter (Device Setting)

When setting the multi-project, set the number of the device points that are used in each project.
As for the devices that are not registered in this setting screen, it means that they are the devices that use fixed number of
points for each project. (Refer to "4.3 Device Range Setting at Multi-project")
Rebooting CNC is required after the parameter setting.
Default
Parameter name
(Initial state)
(Refer to "4.2 List
No. of device points of Devices")
0
No. of common points
Setting range
0 to the maxi- Set the number of device points that each project uses.
mum no. of proj-
ects (*1)
0 to the maxi- From the top of the devices, arbitrary number of points can be set as the
mum no. of proj- common device among projects.
ects (*1) For details, refer to "4.3.3 M Device/D Device Commonizing Setting".
465
Details
IB-1501667-B