Mitsubishi Electric M800VW Series Programming Manual page 898

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function
14.37 Direct Screen Selection
Value of function No. (R357)
Screen
Monitor screen 1
Setup screen 2
Edit screen 3
Diagnosis screen 4
Maintenance screen 5
SFP screen 9
F0 screen 10
Window display 13
Window selection 14
Note
(1) When 9, 10, 13 and 14 is set to the function No., DIRECT_SCREEN item of config.ini needs to be set to "1".
Value of main menu/screen menu (R358) and sub menu/window No. (R359)
The contents to designate in R358/R359 differ depending on the designated function No.
[Setting range when the DIRECT_SCREEN of config.ini is "0"]
Screen Value of R357
Monitor screen 1
Setup screen 2
Edit screen 3
Diagnosis screen 4
Maintenance screen 5
[Setting range when DIRECT_SCREEN of config.ini is "1" and the menu is designated]
Screen Value of R357
Monitor screen 1
Setup screen 2
Edit screen 3
Diagnosis screen 4
Maintenance screen 5
SFP screen 9
F0 screen (*1) 10
Window display 13
Window selection 14
(*1) When F0 screen is designated, the Customization screen is always displayed regardless of the on-board ON parameter
(#6451).
Function No.
Value of R358
Main menu
(0 to 30)
Value of R358
Main menu
(0 to 30)
Menu
(0 to 10)
Value of R359
Sub menu
(0 to 70)
Value of R359
Sub menu
(0 to 70)
Fixed to "0"
877 IB-1501668-B