Pallet Program Registration - Mitsubishi Electric M800VW Series Programming Manual

M800V/M80V Series PLC Programming Manual (2/2)
14 PLC Help Function

14.25 Pallet Program Registration

14.25 Pallet Program Registration
The pallet program registration function allows machining programs to be registered to each pallet of the automatic pallet
changer (hereinafter APC) and supports setups of the machining.
Operation search for the registered program is executed by the PLC ladder using the external function.
This function is applicable to the machining center.
Operation
Machining programs are registered to each pallet in the "pallet program registration" screen under the group of setup screen.
Registered programs are output to the PLC devices.
As required, PLC ladder executes an external search by referring to the program No. registered in each pallet.
The number of pallets that can be registered differs depending on to which screen the pallets are registered.
 Standard pallet registration screen: Max. 2 pallets
 Pallet 4 page registration screen: Max. 12 pallets
HMI system
Pallet program
registration screen
NC main system
PLC device
Pallet pro. reg. I/F
Pallet 1
Mach. pro. No.
Pallet 2
Mach. pro. No.
:
Pallet 12
Mach. pro. No.
Ext. search I/F
Device No.
Program No.
:
Pallet registration function data flow
PLC ladder
721 IB-1501668-B