Mitsubishi Electric M800VW Series Programming Manual page 405

M800V/M80V Series PLC Programming Manual (1/2)
8 Function Instructions
8.11 Special Function Instructions
DEGD, DEGDP: Conversion from floating-point radian to angle (double precision)
Setting
Bit devices
data
X Y M L F
S
D
[Instruction symbol] [Execution condition]
DEGD
DEGDP
 Setting data
Setting data
Radian angle to be converted to degree units or the first number of the device
S
where the radian angle is stored.
D The first number of the device to store the value converted to degree units.
 Functions
DEGD
 Converts units of angle size from radian units designated by (S) to degree units, and stores the operation result in the
device number designated by (D).
S+3 S+2 S+1 S
(
64-bit floating-point real
number
 Conversion from radian units to degree units is performed using the following equation:
Degree units = Radian units × 180 / π
 When the operation results in "-0" or an underflow occurs, the operation result is processed as "0".
 When setting input values from programming tools, rounding errors may occur.
For precautions when setting input values from programming tools, refer to "6.3.4 Single/Double-Precision Real Number
Data".
IB-1501667-B
Usable devices
B SB T SM V T C
○ ○
○ ○
Command
Command
Meaning
D+3 D+2 D+1
) rad
(
64-bit floating-point real
number
Con-
Word devices
stant
D R/ZR W SW SD Z
○ ○ ○ ○ ○
○ ○ ○ ○ ○
D
°
)
384
Digit
Pointer designa- Index
tion
E P
○
○
indicates the sign "DEGD".
S D
P S D
Data type
Real number