Mitsubishi Electric M800VW Series Programming Manual page 213

M800V/M80V Series PLC Programming Manual (1/2)
8 Function Instructions
8.2 Arithmetic Operation Instructions
E+, E+P, E-, E-P: Floating-point data addition and subtraction operations (single precision) (Device at
storage destination: Shared type)
Setting
Bit devices
data
X Y M L F
S
D
[Instruction symbol] [Execution condition]
E+, E-
E+P, E-P
 Setting data
Setting data
Addition or subtraction data, or the first number of the device storing addition or
S
subtraction data.
The first number of the device storing the data to be added to or subtracted from
D
(the result of the addition or subtraction is stored in this device).
 Functions
E+
 Adds the 32-bit floating-point real number designated by (D) to the 32-bit floating-point real number designated by (S) and
stores the result of the addition at the device designated by (D).
D+1 D1
32-bit floating-point real
number
 The following values can be designated and stored by (S) or (D).
-126
0, 2 ≤ | Designated value (stored value) | < 2
 When setting input values from programming tools, rounding errors may occur.
For precautions when setting input values from programming tools, refer to "6.3.4 Single/Double-Precision Real Number
Data".
IB-1501667-B
Usable devices
B SB T SM V T C
○ ○
○ ○
Command
Command
Meaning
S+1 S
+
32-bit floating-point real
number
128
Con-
Word devices
stant
D R/ZR W SW SD Z
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
D+1 D
32-bit floating-point real
number
192
Digit
Pointer designa- Index
tion
E P
○
○
indicates the signs "E+"/"E-"
S D
P S D
Data type
Real number