Mitsubishi Electric M800VW Series Programming Manual page 2

This manual describes the PLC instructions required to create sequence programs of Mitsubishi Electric CNC.
The PLC (Programmable Logic Controller) instructions are largely categorized into the basic instructions, function instructions
and exclusive instructions. There are many types of instructions. The instructions can be used in accordance with the purpose
and application, such as the PLC support function which assists user PLCs.
To create sequence programs, MELSEC Series PLC development software (Mitsubishi Electric's integrated FA engineering
software MELSOFT Series (GX Works2)) is necessary.
Read this manual thoroughly and understand the product's functions and performance before use.
Supported models of this manual are as follows:
Supported models
M800VW Series
M800VS Series
M80VW Series
M80V Series
Abbreviations for model names used in this manual are as follows:
Abbreviations
M800V, M800V Series
M80V, M80V Series
M800V/M80V, M800V/M80V Series
M8V, M8V Series
To safely use this CNC unit, thoroughly study the "Precautions for Safety" before use.
Be sure to keep this manual on hand so that users can refer to it at any time.
Also refer to the manuals on "Manual List" as necessary.
 Details described in this manual
 In this manual, the following abbreviations might be used.
L system: Lathe system
M system: Machining center system
MTB: Machine tool builder
Introduction
M850VW, M830VW
M850VS, M830VS
M80VW
M80V TypeA, M80V TypeB
M800VW Series/M800VS Series
M80VW Series/M80V Series
M800VW Series/M800VS Series/M80VW Series/M80V Series
M800VW Series/M800VS Series/M80VW Series/M80V Series
Abbreviations in this manual
Supported models