Installing The Optional Rack Extension - Agilent Technologies 1200 Series User Manual

Figure 21

Installing the Optional Rack Extension

1 Screw the rack extension locating plate to the Well-plate Handler base plate
2 Seat the rack extension on its locating plate.
Agilent 1200 Series Sample Capacity Extension User Manual
Input and output racks on the Well-plate Handler
suing the three screws provided.
The locating plate has slotted mounting holes to allow for lateral alignment;
set the locating plate centrally in the slots.
Three white-tipped locating pins on the locating plate are designed to fit
into holes on the underside of the rack extension.
• If the Well-plate Handler is placed directly on its locating pins, you can
place the rack extension directly on the pins on its locating plate.
• If the Well-plate Handler is placed on four 30-mm spacers on the locating
plate, place the three large spacers on the rack extension locating plate
(see Figure 22) before placing the rack extension on the spacer pins.
Installation 2
27