6
Using the Laser Head in a System
Figure 19
5
* These raw count values must be multiplied by 0.31nm/count and a compensation number (0.999728766 for
standard air) to convert them into a measurement value.
58
Monitor screen after opening the application
Press the
C l e a r A l l S t a t u s
the lower left of the screen.
The position in uncompensated raw lambda/2048 counts
read in the Position boxes corresponding to axes that have valid
measurement signals as shown in Axis 2 in
button, and then the
Agilent 5517B/BL/C/D/DL/FL User's Guide
button in
P r e s e t A l l A x e s
*
can now be
Figure
20.