Confirming the input temperature
Description
● This function is used to check the resistance temperature detector temperature input temperature.
Content to be checked - TS: Displays the temperature from the resistance temperature detector.
TR: Displays the temperature, however, this is not used.
For actual keying, refer to the typical operation indicated below. Set the protection to OFF beforehand. (See Section 4.4.1.)
Operation
Confirm the input temperature.
(example)
Key operation
Press the
▼
Press the
ENT
▼
Press the
▼
Press the
ENT
▼
ESC
Press the
▼
Press the
ESC
measurement mode.
Description
key for 4 times to display "MAINTENANCE MODE".
key once to display "RAS".
ENT
key for 8 times to display "PT TEMP. CHECK".
key once to display temperatures.
ENT
ESC
key once to exit the confirmation screen.
key once and then press the
ESC
key once to enter the
-85-
Display
MAINTENANCE MODE
RAS 0000H
0000000000000000
PT TEMP. CHECK
TS
0. 0 °C
:
TR
0. 0 °C
:
PT TEMP. CHECK
0. 000
%
0. 000
m3