Fuji Electric FSJ Instruction Manual page 86

Move the cursor by the
▼
key.
Change the BASE SCALE to "0.1".
(Note) If changing the position of the decimal point, align the cursor with
the digit to be changed, and change in the same way by pressing the
key.
ENT Press the ENT
▼
Press the
▼
ENT Press the ENT
▼
Move the cursor by the
▼
key.
Change the BASE SCALE to "10".
(Note) If changing the position of the decimal point, align the cursor with
the digit to be changed, and change in the same way by pressing the
key.
Press the
ENT ENT
▼
Press the
ESC ESC
measurement mode.
key, and change the numeric value by the
key once to register.
――― Base scale has been registered. ―――
key once to display "FULL SCALE".
key once to blink the cursor.
key, and change the numeric value by the
key once to register.
――― Full scale has been registered. ―――
key twice and the key 3 times to return to the
－77－
000. 00000 MPa (G)
000. 10000 MPa (G)
BASE SCALE
＊＊ COMPLETE ＊＊
↓
BASE SCALE
0. 10000 MPa (G)
FULL SCALE
0. 00000 MPa (G)
FULL SCALE
000. 00000 MPa (G)
000. 00000 MPa (G)
010. 00000 MPa (G)
FULL SCALE
＊＊ COMPLETE ＊＊
↓
FULL SCALE
10. 00000 MPa (G)
0. 000 m/s
0. 000 m3/h