Mass total unit setting method
Description
● Select the mass total unit.
● Metric system
Mass total unitꞏꞏꞏꞏꞏ g, kg (factory default), t
<Note> First, set the unit system (metric system) based on section 4.7.1.
When setting, set the total mode to STOP. (See section 4.8.2)
For concrete keying, refer to the typical operation indicated below. Set the protection to OFF beforehand. (See Section 4.4.1.)
Operation
Set the mass total unit to "kg".
(example)
Key operation
Press the
▼
Press the
ENT
▼
Press the
▼
"kg" (factory default) is already registered.
If setting another unit, change using the
ESC
Press the
measurement mode.
Description
key 3 times to display "MEASURE SETUP".
key once to display "SYSTEM UNIT".
ENT
key 4 times to display "MASS TOTAL UNIT".
ESC
key once and the
key and
key.
ENT
key twice to return to the
-36-
Display
MEASURE SETUP
SYSTEM UNIT
METRIC
MASS TOTAL UNIT
0.000
L
0.000
L/min
kg