Product Outline; Overview; Checking Delivered Items - Fuji Electric FSJ Instruction Manual

This ultrasonic flowmeter for steam is used to measure the flow rate of saturated steam inside pipes by mounting ultrasonic
sensors on the outside of existing pipes.
After opening the package, check if all following parts are present.
Note that the delivered parts vary according to the model.
Flow transmitter (FSJ)
Flow transmitter main unit ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 1 set
Waterproof gland (Built into the main unit) ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 1 set
Wall mount frame (Built into the main unit) ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 1 set
Pipe mounting bracket (option)
(bracket × 1, U-bolt × 1, nut × 2, spring washer × 2, plain
washer × 2) × 2 sets
Flow transmitter (FSJ)
Pipe mounting bracket (option)

1. PRODUCT OUTLINE

1.1. Overview

1.2. Checking delivered items

Detector (FSX) and dedicated signal cable (FLYE)
Pre-amplifier unit × 1 set
Pre-amplifier mounting bracket × 1 set
Sensor unit (with cable) × 1 set (2 pieces)
Sensor mounting bracket × 1 set
Noise elimination frame × 3 sets
Dedicated signal cable × 1 piece
Acoustic coupler (option) × 1 piece
CD-ROM (Instruction manual and loader software) ꞏꞏꞏ 1 piece
Safety precautiona ꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏꞏ 1
Items not delivered with product
Power cable, input/output signal cable, RS-485
communication cable, resistance temperature detector
(Pt100 3-wire connections)
－1－